TEC TILE 12 COOL
TEC TILE 12 COOL
TILE GROUT FOR TEC CHILL TILE
KEY BENEFITS AND FEATURES
- It is non-shrinkable and will not crack
- It is anti-fungus and will not promote fungus growth
- It is tough and has high abrasion resistance.
- It has high bond strength.
- It is water repellent.
- It has built-in flexibility to with stand forces created by expansion and contraction of tiles.
- 90 % Heat Resistance
- Reduces the indoor hot air flow by preventing heat penetration
- Saves Energy
- Fire resistance
- Eco friendly
DIRECTIONS FOR USE
SURFACE PREPARATION
Before grouting remove excess mortars and other dust and loose particles with adamp sponge.
MIXING
Mix 2 to 3 parts of TEC TILE 12 COOL to one part of water by volume to form a paste like grout. Wait for fewminutes before applying the grout. For addition of TEC TILE 12 LQ grout admixture will greatly enhance the physical and water resistant property of the cured grout.
APPLICATION
Apply to the tile joints with a squeegee or spatula.
TECHNICAL DATA
| Physical State | Powder |
|---|---|
| Color | White |
| Coverage | 1kg for 3sq meters (32 Sq ft.) Using standard 230mm x 230mm tiles. |
| Thermal Conductivity | 0.6 to 0.7 w/mk |
| Albedo (Solar reflectance) | 0.70 |
| Solar reflection Index (SRI) | 90.1 |
| Water Absorption | 4.9% |
Storage and Shelf life
Tec Tile 12 Cool must be stored in cool, dry location. Maximum of 1 year from date of manufacture in unopened package. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
CLEANING
Remove surplus paste with a wet cloth. Polish the tiles with dry cloth when the job is over.
Packaging
Available in 1 kg retail pack and if required can be supplied in 25 kgs project packing
OTHER PRODUCTS
Techny manufactures lot more range of other products for construction and repair applications. They include admixtures forconcrete, mortars, block making etc, waterproof and damp proof coating systems, Repair and rehabilitations products, Grouts andAnchors, Protective, Decorative and Corrosion prevention coatings, Epoxy Flooring systems, Industrial flooring systems and Tilingaids. For more details refer Separate Product brochures.
Every reasonable precaution is taken in the manufacture of the Techny products to ensure that they comply with high standards of quality.
The recommendations and properties of the products are based upon what is believed to be the most reliable information available and are not intended as recommendations which infringe other patents. Although all Techny products are subject to rigid quality tests, no specific guarantee can be given, because results depend not only on quality but also on other factors beyond our control. We therefore welcome consultation in the event of doubt about application performance etc but do not accept any liability either directly or indirectly arising from the use of the products whether used as per its specifications or advice or otherwise. All transactions shall be subject to our terms of sale, delivery and payment. The leaflet supercedes the previous one and any new issue may take place without notice to supercede this edition as and when it becomes necessary.
TECHNICAL DATA SHEET REVISED,
SEPTEMBER, 2014
