TEC MIX 700
TEC MIX 700
CRYSTALLIZATION TYPE CONCRETE ADMIXTURE
KEY BENEFITS AND FEATURES
- A unique chemical formulation for waterproofing and protection of concrete that penetrates concrete pores and forms insoluble crystals blocking off water entry.
- Permanent with self-healing capabilities - can seal hairline cracks upto 0.5mm
- Unique ability to become a truly integral part of the concrete matrix
- Enhances concrete durability & reduces concrete permeability right from start
- Less costly to install than most other methods
- Increases flexibility in construction scheduling
- Can be directly added to the RMC truck at job site
USAGE
- Basements, Sunken Portion, Foundations & Elevator pits
- Concrete Water Tanks, Roof Slab and Ground parking structures
- Sewage and Water Treatment Plants, Tunnels and Subway Systems
- Reservoirs, Bridges and dams
- When admixed with brickwork and blockwork mortars, vastly improves the quality of the mortars.
- Can be used with plastering and masonry mortars to improve workability and
DIRECTIONS FOR USE
The generally recommended dosage for TecR MIX 700 is 1% of cementby weight.
Note
Under certain conditions the dosage rate maybe between 2-3% depending on the type of concrete required.
Mortar mixing by Hand/ Machine: The cement- sand mix must first be blended thoroughly before sprinkling the correct quantity of TecR MIX 700 – Powder and mixing well. Premeasured quantity of water may then be addedto produce a cohesive mortar.
Concrete mixing by Hand/ Machine: The sand- aggregate mix must first be blended thoroughly before adding cement and mixing well. The correct quantity of TecR MIX 700 – Powder must then be sprinkled and then mixed well. Pre- measured quantity of water may then be added to produce a cohesive concrete mix.
The setting time of the concrete is affected by the chemical and physical composition of ingredients, temperature of the concrete and climatic conditions. For most concrete mix designs adding the TecR MIX 700 will have minimalor no effect on setting time. Concrete containing TECR MIX 700 may develop higher ultimate strength then plain concrete. Trial mixesshould be carried out under project conditions to determine setting time and strength of the concrete.
Technical Data
| Physical State | Grey Powder |
|---|---|
| Chloride Content | Nil as per IS 456 |
| Compatibility | All types of cement |
PRECAUTIONS
Direct contact with skin or eyes should be avoided. Use of gloves, goggles and other protective gear ismandatory. In case of accidental eye contact thorough water washing is advised. This should be followed upwith professional medical assistance. Although TecR MIX 700 is non-toxic it should not be swallowed. TecR MIX 700 is non-flammable.
Storage and Shelf life
As TecR Mix 700 is moisture sensitive. Store it at dry conditions. Store under cover, out of direct sunlight and protect from extremes of temperature. Shelf life is 12 months when stored as above. Failure to comply with there commended storage conditions may result in premature deterioration of the product or packaging.
CLEANING
Tools and equipments can be cleaned with water
Packaging
Available in 1 kg and 25Kgs3
OTHER PRODUCTS
Techny manufactures lot more range of other products for construction and repair applications. They include admixtures for concrete, mortars, block making etc, waterproof and damp proof coating systems, Repair and rehabilitations products, Grouts and Anchors, Protective, Decorative and Corrosion prevention coatings, Epoxy Flooring systems, Industrial flooring systems and Tiling aids. For more details refer Separate Product brochures.
Every reasonable precaution is taken in the manufacture of the Techny products to ensure that they comply with high standards of quality. The recommendations and properties of the products are based upon what is believed to be the most reliable information available and are not intended as recommendations which infringe other patents. Although all Techny products are subject to rigid quality tests, no specific guarantee can be given, because results depend not only on quality but also on other factors beyond our control. We therefore welcome consultation in the event of doubt about application performance etc but do not accept any liability either directly or indirectly arising from the use of the products whether used as per its specifications or advice or otherwise. All transactions shall be subject to our terms of sale, delivery and payment. The leaflet supercedes the previous one and any new issue may take place without notice to supercede this edition as and when it becomes necessary.
TECHNICAL DATA SHEET
ISSUED – February, 2015
