(+91) 82706 58519

Customer Care Number

Tiruchirapalli, IN

Address location

TEC MIX 100 (POWDER)

INTEGRAL WATER PROOFER-POWDER

General Purpose integral waterproofer Powder for all kinds of concretes and mortars. Blends well with concrete and masonry mix to produce dense, high-quality concrete/ mortars.

KEY BENEFITS AND FEATURES

USAGE

DIRECTIONS FOR USE

The generally recommended dosage for TecR Mix 100- Powder is 1Kg per 50Kg bag of cement.

Mortar mixing by Hand/ Machine: The cement- sand mix must first be blended thoroughly before sprinkling the  correct quantity of TecMix 100- Powder and mixing well. Pre- measured quantity of water may then be added to produce a cohesive mortar.

Concrete mixing by Hand/ Machine: The sand- aggregate mix must first be blended thoroughly before adding cement and mixing well. The correct quantity of TecR Mix 100- Powder must then be sprinkled and then mixed well. Pre- measured quantity of water may then be added to produce a cohesive concrete mix.

Technical Data

Physical StateFine white powder
Chloride ContentConforming to IS 2645-2003
Setting TimeConforming to IS 2645-2003
PermeabilityConforming to IS 2645-2003
CompatibilityCompatible with all types of cements.
Dosage1Kg / 50Kg bag of cement

PRECAUTIONS

Direct contact with skin or eyes should be avoided. Use of gloves, goggles and other protective gear is mandatory. In case of accidental eye contact water washing is advised. This should be followed up with professional medical assistance. TecR Mix 100 Powder is non-flammable.

Storage and Shelf life

 As TecR Mix 100 Powder  is moisture sensitive. Store it at dry conditions. Store under cover, out of direct sunlight and protect from extremes of temperature. Shelf life is 12 months when stored as above. Failure to comply with there commended storage conditions may result in premature deterioration of the product or packaging.

CLEANING

Tools and equipments can be cleaned with water.

Packaging

Available in :1 Kg Pack

OTHER PRODUCTS

Techny manufactures lot more range of other products for construction and repair applications. They include admixtures for concrete, mortars, block making etc, waterproof and damp proof coating systems, Repair and rehabilitations products, Grouts and Anchors, Protective, Decorative and Corrosion prevention coatings, Epoxy Flooring systems, Industrial flooring systems and Tiling aids. For more details refer Separate Product brochures.

Every reasonable precaution is taken in the manufacture of the Techny products to ensure that they comply with high standards of quality. The recommendations and properties of the products are based upon what is believed to be the most reliable information available and are not intended as recommendations which infringe other patents. Although all Techny products are subject to rigid quality tests, no specific guarantee can be given, because results depend not only on quality but also on other factors beyond our control. We therefore welcome consultation in the event of doubt about application performance etc but do not accept any liability either directly or indirectly arising from the use of the products whether used as per its specifications or advice or otherwise. All transactions shall be subject to our terms of sale, delivery and payment. The leaflet supercedes the previous one and any new issue may take place without notice to supercede this edition as and when it becomes necessary.

TECHNICAL DATA SHEET
REVISED – 01 July 2013